Electronic Theses and Dissertation
Universitas Syiah Kuala
SKRIPSI
PRARANCANGAN PABRIK SELULOSA NITRAT DARI RNLIMBAH PELEPAH KELAPA SAWIT DENGAN RNKAPASITAS PRODUKSI 10.000 TON/TAHUN
Pengarang
AZIF AFANDI - Personal Name;
Dosen Pembimbing
T. Maimun - 195911261991021001 - Dosen Pembimbing I
T. Mukhriza - 198010032006041003 - Dosen Pembimbing II
Nomor Pokok Mahasiswa
1704103010042
Fakultas & Prodi
Fakultas Teknik / Teknik Kimia (S1) / PDDIKTI : 24201
Subject
Kata Kunci
Penerbit
Banda Aceh : Fakultas Teknik (S1)., 2022
Bahasa
No Classification
-
Literature Searching Service
Hard copy atau foto copy dari buku ini dapat diberikan dengan syarat ketentuan berlaku, jika berminat, silahkan hubungi via telegram (Chat Services LSS)
ABSTRAK
Prarancangan pabrik selulosa nitrat didirikan dengan menggunakan limbah
pelepeah kelapa sawit sebagai bahan baku. Proses produksi secara keseluruhan
menggunakan proses kontinyu dengan melibatkan proses nitrating, separation, dan
purification. Kapasitas produksi pabrik selulosa nitrat ini adalah 10.000 ton per tahun
dengan hari kerja 330 hari pertahun. Bentuk perusahaan yang direncanakan adalah
Perseroan Terbatas (PT) dengan menggunakan metode struktur organisasi garis dan
staf. Kebutuhan tenaga kerja untuk menjalankan perusahaan ini berjumlah 86 orang.
Lokasi pabrik direncanakan didirikan di Gampong Kebun Teumpeun, Kecamatan
Peurelak Barat, Kabupaten Aceh Timur, Provinsi Aceh dengan luas tanah 66.648 m2
.
Sumber air untuk pabrik selulosa nitrat ini berasal dari air sungai yaitu sungai Bar.
Hasil analisa ekonomi yang diperoleh adalah sebagai berikut:
1. Fixed Capital Investment (FCI) = Rp. 158.109.957.689
2. Working Capital Investment (WCI) = Rp. 17.567.773.077
3. Total Capital Investment (TCI) = Rp. 175.677.730.765
4. Total Production Cost (TPC) = Rp. 283.444.246.347
5. Sales Cost (SC) = Rp. 367.520.509.119
6. Laba Bersih = Rp. 63.057.197.078
7. Pay Out Time (POT) = 3,10 tahun
8. Break Event Point (BEP) = 36,86%
9. Internal Rate of Return (IRR) = 34,06%
Berdasarkan studi kelayakan teknis dan ekonomis di atas, maka dapat
disimpulkan bahwa prarancangan pabrik selulosa nitrat ini layak untuk dilanjutkan ke
tahap konstruksi.
ABSTRACT The preparation of the nitrocellulose plant was established by using oil waste palm midbrid as raw material. The whole production process uses a continuous process involving the process of nitrating, separation, and purification. The production capacity of this cellulose nitrate plant is 10,000 tons per year with a working day of 330 days per year. The form of the planned company is a Limited Liability Company (PT) using the method of organizational structure of the line and staff. The need for workforce to run this company amounted to 86 people. The factory location is planned to be established in the village of Kebun Teumpeun, West Peurelak Regency, Aceh Timur City, Aceh Province with a land area of 66.648 m2 . The source of water for this cellulose nitrate plant comes from Bar river. From economic analysis was obtained: 1. Fixed Capital Investment (FCI) = Rp. 158.109.957.689 2. Working Capital Investment (WCI) = Rp. 17.567.773.077 3. Total Capital Investment (TCI) = Rp. 175.677.730.765 4. Total Production Cost (TPC) = Rp. 283.444.246.347 5. Sales Cost (SC) = Rp. 367.520.509.119 6. Net Profit = Rp. 63.057.197.078 7. Pay Out Time (POT) = 3,10 tahun 8. Break Event Point (BEP) = 36,86% 9. Internal Rate of Return (IRR) = 34,06% Based on the above technical and economic feasibility studies, it can be concluded that the design of the cellulose nitrate factory is feasible to proceed to the construction phase.
PRARANCANGAN PABRIK SELULOSA NITRAT DARI RNLIMBAH PELEPAH KELAPA SAWIT DENGAN RNKAPASITAS PRODUKSI 10.000 TON/TAHUN (AZIF AFANDI, 2022)
LITERATURE REVIEW: KARAKTERISASI SIFAT MEKANIK NANOKRISTAL SELULOSA DARI LIMBAH KELAPA SAWIT DAN APLIKASI SEBAGAI FILLER PADA BIONANOKOMPOSIT (Dian Hermayanti, 2020)
PRARANCANGAN PABRIK SELULOSA NITRAT DARI PULP KAYU DENGAN KAPASITAS PRODUKSI 7.000 TON/TAHUN (Irma Suriana Sari, 2017)
PRARANCANGAN PABRIK SELULOSA NITRAT DARI PULP KAYU DENGAN KAPASITAS PRODUKSI 7.000 TON/TAHUN (Nurul Ismi, 2017)
PRARANCANGAN PABRIK SELULOSA NITRAT DENGAN MENGGUNAKAN JERAMI PADI SEBAGAIRNBAHAN BAKU. PROSES PRODUKSI SECARA KESELURUHAN MENGGUNAKAN PROSES KONTINYURNPRARANCANGAN PABRIK SELULOSA NITRAT DARI JERAMI PADI DENGAN KAPASITAS 158.400 TON/TAHUN (SUHANDI, 2014)