KAPASITAS GESER BALOK PROFIL I FERRO FOAM CONCRETE | ELECTRONIC THESES AND DISSERTATION

Electronic Theses and Dissertation

Universitas Syiah Kuala

    THESES

KAPASITAS GESER BALOK PROFIL I FERRO FOAM CONCRETE


Pengarang

Nanda Mahathir - Personal Name;

Dosen Pembimbing

Mochammad Afifuddin - 196409071989031003 - Dosen Pembimbing I
Abdullah - 196403211989031002 - Dosen Pembimbing II
Yulia Hayati - 197107091997022002 - Penguji
Muttaqin - 196606151990091001 - Penguji



Nomor Pokok Mahasiswa

1804201010022

Fakultas & Prodi

Fakultas Teknik / Teknik Sipil (S2) / PDDIKTI : 22101

Subject
-
Kata Kunci
-
Penerbit

Banda Aceh : Fakultas Teknik S2., 2022

Bahasa

No Classification

-

Literature Searching Service

Hard copy atau foto copy dari buku ini dapat diberikan dengan syarat ketentuan berlaku, jika berminat, silahkan hubungi via telegram (Chat Services LSS)

Beton ringan adalah beton yang memiliki berat jenis (density) lebih ringan dari pada beton pada umumnya. Salah satu jenis beton ringan adalah beton busa (foam concrete). Provinsi Aceh merupakan salah salah satu provinsi yang rawan gempa bumi. Material ferro foam concrete merupakan suatu alternatif dalam mereduksi resiko yang akan terjadi akibat gempa bumi. Ferro Foam Concrete adalah material yang terbuat dari kombinasi antara wiremesh dan beton busa. Keuntungan dari bahan ini selain kemampuannya yang tinggi dalam memikul beban, beratnya ringan, dan mudah diproduksi. Penelitian tentang Profil Canal (C) dikonfigurasi ke I dengan menggunakan bahan beton busa (ferro foam concrete) pernah dilakukan oleh Afifuddin dkk (2013-2014). Dari hasil penelitian tersebut ditemukan kelemahan dari gelagar jenis ini, gelagar mengalami kegagalan lentur saat pengujian dilakukan, karena adanya penggabungan dua buah profil C, maka kemampuan gelagar sebagai profil I tidak sepenuhnya tercapai. Ini disebabkan karena ukuran sayap yang diperhitungkan sebagai bagian yang menyatu pada profil I, tidak sepenuhnya dicapai. Sehingga dari permasalahan ini penulis ingin melakukan penelitian lanjutan tentang material ini. Tujuan dari penelitian ini adalah untuk mengetahui kapasitas geser dalam menerima beban. Benda uji yang akan dibuat adalah profil I berjumlah 3 benda uji. BU 1 Lebar 225 mm, tinggi 450 mm, tebal 90 mm, dan 3 lapis wiremesh. BU 2 Lebar 225 mm, tinggi 450 mm, tebal 90 mm, dan 4 lapis wiremesh. BU 3 Lebar 300 mm, tinggi 600 mm, tebal 120 mm, dan 4 lapis wiremesh. Penulangan benda uji menggunakan D8 mm dan D13 mm (baja ulir). SG 1,6 dengan FAS 0,4 dan pozzolan sebesar 10%. Hasil penelitian kapasitas geser profil I 450-225-90-3L dari hasil laboratorium 11,855 ton, dan dari teoritis didapat 12,007 ton. Untuk profil I 450-225-90-4L hasil laboratorium kapasitas gesernya 12,730 ton, sedang hasil teoritisnya 13,394 ton, dan kapasitas geser untuk profil I 600-300-120-4L hasil laboratorium sebesar 21,150 ton dan berdasarkan teoritis 24,462 ton.

Kata Kunci : ferro foam concrete, Profil I, wiremesh. Gelagar

Lightweight concrete has a lower density than regular concrete. Foam concrete is one type of lightweight concrete. Aceh is one of the earthquake-prone provinces in Indonesia. Ferro foam concrete as a material to reduce the risk of earthquakes is an option. Ferro Foam Concrete is a composite material that combines wire mesh and foam concrete. Aside from its high load carrying capacity, lightweight, and ease of manufacture, this material have several advantages. Afifuddin et al. researched Canal Profile (C) configured to I using Ferro foam concrete (2013-2014). According to the findings of this study, the girder's weakness was that it experienced flexural failure during the test and that the ability of the girder as the I profile was not fully achieved due to the merging of two C profiles. The I profile does not fully achieve the size of the wings and body, which is calculated as an integral part of the I profile. As a result of this issue, the author wishes to conduct additional research on the subject. This research aimed to determine the shear capacity of the load-receiving system. The I Profile is the first of three samples to be created. BU 1 has three layers of wiremesh and measures 225 mm wide, 450 mm high, and 90 mm thick. BU 2 has four layers of wiremesh and measures 225 mm wide, 450 mm high, and 90 mm thick. Speciments 3 has four layers of wiremesh and is 300 mm wide, 600 mm high, and 120 mm thick. Reinforcement of test samples with D8 mm and D13 mm (steel screws) and wiremesh 3, 4, and 4 layers. SG 1,6 with FAS 0,4 and pozzolan at 10%. The results of the research on the shear capacity of the profile I 450-225-90-3L from the laboratory results were 11,855 tons, and from the theoretical obtained 12,007 tons. For the I profile of 450-225-90-4L, the laboratory results have a shear capacity of 12,730 tons. In comparison, the theoretical yield is 13.394 tons, and the shear capacity for the I profile of 600-300-120-4L is 21,150 tons and based on theoretical 24,462 tons. Keywords : Ferro Foam Concrete, Profil I, Wiremesh, Girder

Citation



    SERVICES DESK