Electronic Theses and Dissertation
Universitas Syiah Kuala
SKRIPSI
PRARANCANGAN PABRIK SELULOSA NITRAT DARI LIMBAH PERTANIAN KELAPA SAWIT DENGAN KAPASITAS PRODUKSI 10.000 TON/TAHUN
Pengarang
LINDIA RIANI - Personal Name;
Dosen Pembimbing
T. Maimun - 195911261991021001 - Dosen Pembimbing I
T. Mukhriza - 198010032006041003 - Dosen Pembimbing II
Hisbullah - 197007131997021002 - Penguji
Nomor Pokok Mahasiswa
1704103010033
Fakultas & Prodi
Fakultas Teknik / Teknik Kimia (S1) / PDDIKTI : 24201
Subject
Kata Kunci
Penerbit
Banda Aceh : Fakultas Teknik Kimia., 2022
Bahasa
No Classification
-
Literature Searching Service
Hard copy atau foto copy dari buku ini dapat diberikan dengan syarat ketentuan berlaku, jika berminat, silahkan hubungi via telegram (Chat Services LSS)
Prarancangan pabrik selulosa nitrat didirikan dengan menggunakan limbah pertanian kelapa sawit sebagai bahan baku. Proses produksi secara keseluruhan menggunakan proses kontinyu dengan melibatkan proses nitrating, separation, dan purification. Kapasitas produksi pabrik selulosa nitrat ini adalah 10.000 ton per tahun dengan hari kerja 330 hari pertahun. Bentuk perusahaan yang direncanakan adalah Perseroan Terbatas (PT) dengan menggunakan metode struktur organisasi garis dan staf. Kebutuhan tenaga kerja untuk menjalankan perusahaan ini berjumlah 86 orang. Lokasi pabrik direncanakan didirikan di Gampong Bar, Kecamatan Peurelak Bar, Kabupaten Aceh Timur, Provinsi Aceh dengan luas tanah 66.648 m2. Sumber air untuk pabrik selulosa nitrat ini berasal dari air sungai yaitu sungai Bar.
Hasil analisa ekonomi yang diperoleh adalah sebagai berikut:
1. Fixed Capital Investment (FCI) = Rp. 158.109.957.689
2. Working Capital Investment (WCI) = Rp. 17.567.773.077
3. Total Capital Investment (TCI) = Rp. 175.677.730.765
4. Total Production Cost (TPC) = Rp. 283.444.246.347
5. Sales Cost (SC) = Rp. 367.520.509.119
6. Laba Bersih = Rp. 63.057.197.078
7. Pay Out Time (POT) = 3,10 tahun
8. Break Event Point (BEP) = 36,86%
9. Internal Rate of Return (IRR) = 34,06%
Berdasarkan studi kelayakan teknis dan ekonomis di atas, maka dapat disimpulkan bahwa prarancangan pabrik selulosa nitrat ini layak untuk dilanjutkan ke tahap konstruksi.
The preparation of the cellulose nitrate plant was established by using oil palm agricultural waste as raw material. The whole production process uses a continuous process involving the process of nitrating, separation, and purification. The production capacity of this cellulose nitrate plant is 10,000 tons per year with a working day of 330 days per year. The form of the planned company is a Limited Liability Company (PT) using the method of organizational structure of the line and staff. The need for workforce to run this company amounted to 86 people. The factory location is planned to be established in the village of Bar, Peurelak Bar Regency, Aceh Timur City, Aceh Province with a land area of 66.648 m2. The source of water for this cellulose nitrate plant comes from Bar river. From economic analysis was obtained: 1. Fixed Capital Investment (FCI) = Rp. 158.109.957.689 2. Working Capital Investment (WCI) = Rp. 17.567.773.077 3. Total Capital Investment (TCI) = Rp. 175.677.730.765 4. Total Production Cost (TPC) = Rp. 283.444.246.347 5. Sales Cost (SC) = Rp. 367.520.509.119 6. Net Profit = Rp. 63.057.197.078 7. Pay Out Time (POT) = 3,10 tahun 8. Break Event Point (BEP) = 36,86% 9. Internal Rate of Return (IRR) = 34,06% Based on the above technical and economic feasibility studies, it can be concluded that the design of the cellulose nitrate factory is feasible to proceed to the construction phase.
PRARANCANGAN PABRIK SELULOSA NITRAT DARI RNLIMBAH PELEPAH KELAPA SAWIT DENGAN RNKAPASITAS PRODUKSI 10.000 TON/TAHUN (AZIF AFANDI, 2022)
LITERATURE REVIEW: KARAKTERISASI SIFAT MEKANIK NANOKRISTAL SELULOSA DARI LIMBAH KELAPA SAWIT DAN APLIKASI SEBAGAI FILLER PADA BIONANOKOMPOSIT (Dian Hermayanti, 2020)
PRARANCANGAN PABRIK SELULOSA NITRAT DARI PULP KAYU DENGAN KAPASITAS PRODUKSI 7.000 TON/TAHUN (Irma Suriana Sari, 2017)
PRARANCANGAN PABRIK SELULOSA NITRAT DARI PULP KAYU DENGAN KAPASITAS PRODUKSI 7.000 TON/TAHUN (Nurul Ismi, 2017)
PRARANCANGAN PABRIK SELULOSA NITRAT DARI JERAMI PADI DENGAN KAPASITAS 158.400 TON/TAHUN (endy setiawan, 2014)