Electronic Theses and Dissertation
Universitas Syiah Kuala
SKRIPSI
PRARANCANGAN PABRIK DIMETIL ETER DARI METANOL MELALUI PROSES DEHIDRASI DENGAN KAPASITAS PRODUKSI 200.000 TON/TAHUN
Pengarang
ARVAN ANUR - Personal Name;
Dosen Pembimbing
Darmadi - 196603231993031003 - Dosen Pembimbing I
Umi Fathanah - 197404032000122001 - Dosen Pembimbing II
Nomor Pokok Mahasiswa
1704103010081
Fakultas & Prodi
Fakultas Teknik / Teknik Kimia (S1) / PDDIKTI : 24201
Subject
Kata Kunci
Penerbit
Banda Aceh : Fakultas Teknik., 2021
Bahasa
No Classification
-
Literature Searching Service
Hard copy atau foto copy dari buku ini dapat diberikan dengan syarat ketentuan berlaku, jika berminat, silahkan hubungi via telegram (Chat Services LSS)
ABSTRAK
Prarancangan pabrik Dimetil Eter ini menggunakan Metanol sebagai bahan baku. Kapasitas produksi pabrik ini adalah 200.000 Ton/Tahun dengan hari kerja 330 hari/tahun. Bentuk perusahaan yang direncanakan adalah Perseroan Terbatas (PT) dengan menggunakan metode struktur garis dan staf. Kebutuhan tenaga kerja untuk menjalankan perusahaan ini berjumlah 129 orang. Lokasi pabrik direncanakan didirikan di Bontang, Kalimantan Timur. Sumber air pabrik Dimetil Eter ini berasal dari sungai Sungai Guntung, Kalimantan Timur.
Hasil analisa ekonomi yang diperoleh adalah sebagai berikut :
1. Fixed Capital Investment = Rp. 490.339.880.368,-
2. Working Capital Investment = Rp. 122.584.970.092,-
3. Total Capital Investment = Rp. 612.924.850.460,-
4. Total Biaya Produksi = Rp. 2.574.910.679.204,-
5. Hasil Penjualan = Rp. 2.879.004.167.419,-
6. Laba Bersih = Rp. 228.070.116.161,-
7. Pay Out Time = 4,13 Tahun
8. Break Event Point (BEP) = 51,29 %
9. Internal Rate of Return (IRR) = 25,81 %
10. Rate of Return = 37,21 %
Berdasarkan studi kelayakan teknis dan ekonomi di atas, maka dapat disimpulkan bahwa Prarancangan Pabrik Dimetil Eter ini layak untuk dilanjutkan ke tahap konstruksi.
ABSTRACT This Dymetil Eter plant design used Methanol as raw materials. The production capacity of this factory is 200.000 tons/year with 330 working days/year. The planned form of the company is a limited liability company (PT) using the line and staff structure method. The need for manpower to run this company amounted to 129 people. The location of the factory is planned to be established in Bontang, East Kalimantan. The source of the Dymetil Eter factory water comes from the Guntung river, East Kalimantan. From economic analysis was obtained : 1. Fixed Capital Investment (FCI) = Rp. 490.339.880.368,- 2. Working Capital Investment(WCI) = Rp. 122.584.970.092,- 3. Total Capital Investment (TCI) = Rp. 612.924.850.460,- 4. Total Production Cost (TPC) = Rp. 2.574.910.679.204,- 5. Total Income (TI) = Rp. 2.879.004.167.419,- 6. Net Profit = Rp. 228.070.116.161,- 7. Pay Out Time (POT) = 4,13 years 8. Break Event Point (BEP) = 51,29 % 9. Internal Rate of Return (IRR) = 25,81 % 10. Rate of Return (ROR) = 37,21 % Based on the above technical and economic feasibility studies, it can be concluded that the design of the Dymetil Eter is feasible to proceed to the construction phase.
PRARANCANGAN PABRIK DIMETIL ETER BERBAHAN BAKU METANOL DENGAN KAPASITAS PRODUKSI 100.000 TON/TAHUN (ASWIN SISWANTO, 2021)
PRARANCANGAN PABRIK DIMETIL ETER DARI METANOL MELALUI PROSES DEHIDRASI DENGAN KAPASITAS PRODUKSI 200.000 TON/TAHUN (ARVAN ANUR, 2021)
PRARANCANGAN PABRIK DIMETIL ETER DARI METANOL MELALUI PROSES DEHIDRASI DENGAN KAPASITAS PRODUKSIRN200.000 TON/TAHUN (MUAMMAR KODRI SITOMPUL, 2022)
PRARANCANGAN PABRIK DIMETIL ETER DARI METANOL MELALUI PROSES DEHIDRASI DENGAN KAPASITAS PRODUKSI 250.000 TON/TAHUN (Revanza Barizqi, 2022)
PRARANCANGAN PABRIK DIMETIL TEREPTHALATE DARI ASAM TEREPTHALIK DAN METANOL DENGAN KAPASITAS PRODUKSI 70.000 TON/TAHUN (Andri Syahputra, 2024)