TEKNIK LIBS UNTUK MENGUJI KEKERASAN TABLET DENGAN MEMBANDINGKAN RASIO MG (II) 279,5 NM DAN MG (I) 285,2 NM | ELECTRONIC THESES AND DISSERTATION

Electronic Theses and Dissertation

Universitas Syiah Kuala

    NULL

TEKNIK LIBS UNTUK MENGUJI KEKERASAN TABLET DENGAN MEMBANDINGKAN RASIO MG (II) 279,5 NM DAN MG (I) 285,2 NM


Pengarang

SURIANI - Personal Name;

Dosen Pembimbing



Nomor Pokok Mahasiswa

1108102010017

Fakultas & Prodi

Fakultas MIPA / Fisika (S1) / PDDIKTI : 45201

Subject
-
Kata Kunci
-
Penerbit

Banda Aceh : Universitas Syiah Kuala., 2015

Bahasa

Indonesia

No Classification

-

Literature Searching Service

Hard copy atau foto copy dari buku ini dapat diberikan dengan syarat ketentuan berlaku, jika berminat, silahkan hubungi via telegram (Chat Services LSS)

iii
ABSTRAK
Telah dilakukan pengujian tingkat kekerasan tablet menggunakan teknik Laser
Induced Breakdown Spectroscopy (LIBS). Tujuan penelitian ini untuk mengetahui
bahwa teknik LIBS dapat digunakan untuk menguji tingkat kekerasan tablet dan
aplikasinya untuk mengontrol kualitas produk farmasi terutama dalam bentuk
tablet. Penelitian ini menggunakan teknik Laser Induced Breakdown Spectroscopy
(LIBS) dengan cara menghitung nilai rasio antara intensitas Mg (II) dan intensitas
Mg (I), pada panjang gelombang 279,5 nm dan 285,2 nm. Sampel tablet yang
digunakan ada beberapa macam, yaitu tablet komersial (Paracetamol dan Dumin) ,
tablet yang dibuat dalam bentuk pele t dengan variasi tekanan pengempaan 2, 4, 6,
8 dan 10 N/m
2
, serta tablet komersial yang terkontaminasi akibat penyimpanan
yang kurang baik dan lamanya waktu penyimpanan tablet. Hasil penelitian
didapatkan bahwa teknik LIBS bisa digunakan untuk menguji tingkat kekerasan
tablet, dan hubungan antara tingkat tekanan pengempaan terhadap nilai rasio
adalah linier, serta tablet komersial yang terkontaminasi memiliki rasio yang
tinggi yaitu sebesar 9,1 apabila dibandingkan dengan rasio tablet yang tidak
terkontaminasi yaitu sebesar 3,8. Kesimpulan dari penelitian ini adalah, teknik
Laser Induced Breakdown Spectroscopy (LIBS) dapat digunakan untuk menguji
tingkat kekerasan tablet serta dapat digunakan untuk mengontrol kualitas produk
farmasi terutama dalam bentuk sediaan tablet.
Kata kunci : Tablet, kekerasan, Laser Induced Breakdown Spectroscopy (LIBS),
kontrol kualitas.
iv
ABSTRACT
Has been testing the tablet hardness level using the technique of Laser Induced
Breakdown Spectroscopy (LIBS). The purpose of this study to determine that the
LIBS technique can be used to test the hardness of tablets and their application to
control the quality of pharmaceutical products primarily in the form of tablets.
This research uses technique of Laser Induced Breakdown Spectroscopy (LIBS)
by calculating the ratio between the intensity of Mg (II) and the intensity of Mg
(I), at a wavelength of 279.5 nm and 285.2 nm. Sample tablet that is used there
are several kinds, namely tablets commercial (Paracetamol and Dumin), tablets
are made in the form of pellets with pressure variations compression 2, 4, 6, 8 and
10 N/m
2
, and the tablets commercially contaminated as a result of storage that
are less well and the length of time the tablets torage. The research found that the
LIBS technique can be used to test the hardness of tablets, and the relationship
between the level of compression pressure on the value of the ratio is linear, as
well as contaminated commercial tablet has a high ratio that is equal to 9.1 when
compared with the tablet uncontaminated ratio is equal 3.8. The conclusion from
this research is that the technique of Laser Induced Breakdown Spectroscopy
(LIBS) can be used to test the hardness of tablets and can be used to control
quality of pharmaceutical products primarily in tablet dosage forms.
Keywords : Tablet, hardness, Laser Induced Breakdown Spectroscopy (LIBS),
control quality

Tidak Tersedia Deskripsi

Citation



    SERVICES DESK