PENGARUH PENAMBAHAN ABU SEKAM PADI TERHADAP SIFAT FISIS DAN SIFAT TERMAL MORTAR SEBAGAI MATERIAL BANGUNAN RAMAH LINGKUNGAN | ELECTRONIC THESES AND DISSERTATION

Electronic Theses and Dissertation

Universitas Syiah Kuala

    SKRIPSI

PENGARUH PENAMBAHAN ABU SEKAM PADI TERHADAP SIFAT FISIS DAN SIFAT TERMAL MORTAR SEBAGAI MATERIAL BANGUNAN RAMAH LINGKUNGAN


Pengarang

Khaira Maulida - Personal Name;

Dosen Pembimbing

Malahayati - 197407252000122001 - Dosen Pembimbing I
Mursal - 197012201997021001 - Dosen Pembimbing II



Nomor Pokok Mahasiswa

2108102010015

Fakultas & Prodi

Fakultas MIPA / Fisika (S1) / PDDIKTI : 45201

Subject
-
Kata Kunci
-
Penerbit

Banda Aceh : Fakultas MIPA Fisika., 2026

Bahasa

No Classification

-

Literature Searching Service

Hard copy atau foto copy dari buku ini dapat diberikan dengan syarat ketentuan berlaku, jika berminat, silahkan hubungi via telegram (Chat Services LSS)

Peningkatan kebutuhan material konstruksi yang ramah lingkungan memicu eksplorasi pemanfaatan limbah pertanian sebagai bahan tambah alternatif dalam pembuatan mortar. Penelitian ini bertujuan untuk mengkaji pengaruh penambahan abu sekam padi terhadap sifat fisis dan sifat termal mortar guna menghasilkan material yang efisien secara termal dan hemat energi. Metode eksperimen dilakukan menggunakan penambahan komposisi abu sekam padi sebesar 0% (kontrol), 5%, 10%, 15%, dan 20% dari berat semen. Sifat fisis material dianalisis melalui pengujian densitas dan porositas, sedangkan sifat termal berdasarkan nilai konduktivitas termal (K) dan kapasitas kalor (C). Hasil penelitian menunjukkan bahwa peningkatan komposisi abu sekam padi berbanding lurus dengan peningkatan porositas dan sifat isolasi termal, namun berbanding terbalik dengan densitas. Densitas rata-rata mortar menurun dari 2,12 g/cm³ (0%) menjadi 1,79 g/cm³ (20%), diikuti oleh kenaikan porositas dari 16,04% menjadi 30,08%. Karakteristik mortar yang porous ini secara signifikan menurunkan kemampuan hantar panas secara konduksi, di mana nilai konduktivitas termal (K) turun hingga menyentuh angka terendah 0,092691 W/m°C pada variasi 20%. Penurunan laju konduksi ini diimbangi dengan lonjakan kapasitas kalor (C) mencapai 3441,127 J/ °C yang membuktikan kemampuan akumulasi termal yang efektif.

The growing demand for eco-friendly construction materials has spurred research into utilizing agricultural waste as an alternative additive in mortar production. This study aims to examine the effect of adding rice husk ash on the physical and thermal properties of mortar to produce a material that is thermally efficient and energy-saving. Experimental methods involved incorporating rice husk ash at levels of 0% (control), 5%, 10%, 15%, and 20% of the cement weight. Physical properties were analyzed through density and porosity tests, while thermal properties were assessed based on thermal conductivity (K) and heat capacity (C). The results indicate that increasing the rice husk ash content is exponencially to increase in porosity and thermal insulation properties, yet inversely proportional to density. The average mortar density decreased from 2.12 g/cm³ (0%) to 1.79 g/cm³ (20%), accompanied by a rise in porosity from 16.04% to 30.08%. This porous nature significantly reduced heat conduction, with thermal conductivity (K) dropping to a minimum of 0.092691 W/m°C in the 20% variation. This reduction in the conduction rate was balanced by a rise in heat capacity (C) to 3441.127 J/°C, demonstrating effective thermal accumulation capability.

Citation



    SERVICES DESK