Electronic Theses and Dissertation
Universitas Syiah Kuala
SKRIPSI
DESAIN DAN APLIKASI STATCOM DENGAN ALGORITMA POWER BALANCE THEORY UNTUK OPTIMALISASI DAYA AKTIF SALURAN
Pengarang
Ferry Andrian - Personal Name;
Dosen Pembimbing
Nomor Pokok Mahasiswa
2004105010061
Fakultas & Prodi
Fakultas Teknik / Teknik Elektro (S1) / PDDIKTI : 20201
Subject
Kata Kunci
Penerbit
Banda Aceh : Fakultas Teknik Elektro dan Komputer., 2024
Bahasa
No Classification
-
Literature Searching Service
Hard copy atau foto copy dari buku ini dapat diberikan dengan syarat ketentuan berlaku, jika berminat, silahkan hubungi via telegram (Chat Services LSS)
Abstrak- Penelitian ini membahas tentang desain dan aplikasi Static Synchronous Compensator (STATCOM) dengan menggunakan algoritma Power Balance Theory (PBT) untuk mengoptimalkan kapasitas saluran tenaga listrik akibat beban reaktif. Beban reaktif menyebabkan kapasitas saluran menjadi tidak optimal dalam menyalurkan daya aktif. Dalam studi ini, STATCOM digunakan untuk kompensasi dampak daya reaktif oleh beban, sehingga dapat memperbaiki faktor daya dan kemampuan saluran dalam menyalurkan daya aktif. Simulasi dilakukan menggunakan algoritma Power Balance Theory untuk mengevaluasi efektivitas STATCOM yang didesain dengan kapasitas 3 MVAr dalam meningkatkan faktor daya saluran sepanjang 3 km yang melayani beban bernilai 3.131 kVA pada faktor daya 0,7 lagging. Hasil simulasi menunjukkan bahwa penggunaan STATCOM dengan algoritma PBT ini dapat meningkatkan faktor daya saluran dari 0.69 menjadi 0.98 dan dapat meningkatkan profil tegangan sebesar 0,05 pu. Selain itu, STATCOM juga dapat meminimalkan arus saluran sebesar 24% dari sebelumnya 1 pu menjadi 0.76 pu dan memperbaiki arus beban sebesar 6% dari sebelumnya 0,94 pu menjadi 1 pu.
Kata kunci: STATCOM, Power Balance Theory, Faktor Daya, Profil Tegangan.
Abstract- This research discusses about design and application of Static Synchronous Compensator (STATCOM) using Power Balance Theory (PBT) algorithm for optimize line capacity of power system due to reactive load. Reactive load causes the line capacity to be not optimal in delivering active power. In this study, STATCOM is used to compensate the impact of reactive power by the load, thereby improving the power factor and the ability of the line to deliver active power. The simulations were conducted using the Power Balance Theory algorithm to evaluate the effectiveness of a STATCOM designed with a capacity of 3 MVAr in improving the power factor of a 3 km long line serving a load of 3,131 kVA at 0.7 power factor lagging. The simulation results show that the use of STATCOM with PBT algorithm can improve the power factor of the line from 0.69 to 0.98 and can improve the voltage profile by 0.05 pu. In addition, STATCOM can also minimize the line current by 24% from 1 pu to 0.76 pu and improve the load current by 6% from 0.94 pu to 1 pu. Keywords: STATCOM, Power Balance Theory, Power Factor, Voltage Profile.
SIMULASI PERBAIKAN STABILITAS DINAMIS SISTEM TENAGA 150 KV DENGAN STATCOM BERBASIS MODULAR MULTILEVEL CONVERTER (MMC) (CUT RAISSA SHABIRA, 2022)
ANALISIS PERBAIKAN KUALITAS DAYA PADA SISTEM DISTRIBUSI 20 KV MENGGUNAKAN D-STATCOM (Janasha Dara Reskyna, 2025)
ANALISIS ECONOMIC DISPATCH DENGAN OPTIMAL POWER FLOW (OPF) MELIBATKAN UNIFIED POWER FLOW CONTROLLER (UPFC) (Fitri Nia Dinata, 2023)
ANALISIS ALIRAN DAYA BEBAN TIDAK SEIMBANG JARINGAN DISTRIBUSI DENGAN MENGGUNAKAN D- STATCOM (Suherman, 2024)
PENGARUH STATIC VAR COMPENSATOR TERHADAP BIAYA PEBANGKITAN DAYA AKTIF UNIT PEMBANGKIT (Nurmalina Fitriani, 2023)