PEMETAAN STRUKTUR DANGKAL SEULAWAH AGAM BERDASARKAN ANALISIS DATA TRANSIENT ELECTROMAGNETIC | ELECTRONIC THESES AND DISSERTATION

Electronic Theses and Dissertation

Universitas Syiah Kuala

    SKRIPSI

PEMETAAN STRUKTUR DANGKAL SEULAWAH AGAM BERDASARKAN ANALISIS DATA TRANSIENT ELECTROMAGNETIC


Pengarang

AHMAD AL FARABI NASUTION - Personal Name;

Dosen Pembimbing


Nomor Pokok Mahasiswa

1804107010029

Fakultas & Prodi

Fakultas Teknik / Teknik Geofisika (S1) / PDDIKTI : 33201

Subject
-
Kata Kunci
-
Penerbit

Banda Aceh : Fakultas Teknik., 2022

Bahasa

No Classification

-

Literature Searching Service

Hard copy atau foto copy dari buku ini dapat diberikan dengan syarat ketentuan berlaku, jika berminat, silahkan hubungi via telegram (Chat Services LSS)

Metode Transient Electromagnetic (TEM) atau Time Domain Electromagnetic (TDEM) merupakan metode elektromagnetik aktif yang mentransmisikan gelombang elektromagnetik ke dalam permukaan lalu merekam respons elektromagnetik yang terbentuk secara sementara. TEM memiliki kemampuan penetrasi hingga 1 kilometer, sehingga banyak digunakan dalam eksplorasi panas bumi karena mampu mengidentifikasi struktur dangkal sistem panas bumi seperti caprock, reservoir, manifestasi, dan patahan. Penelitian ini menerapkan metode TEM pada area Seulawah Agam yang diperkirakan memiliki prospek manifestasi pembangkit listrik tenaga panas bumi hingga 230 MW. Data TEM diolah dengan inversi 1D berdasarkan inversi Occam lalu ditampilkan dengan cross-section 2D dan 3D depth slice untuk mengidentifikasi struktur anomali dangkal sistem panas bumi Seulawah Agam. Berdasarkan hasil cross-section 2D dijumpai anomali dangkal dari sistem panas bumi yaitu lapisan clay cap yang terdapat di sepanjang lintasan dengan resistivitas rendah (0,4 – 16,36 Ωm) didukung dengan kehadiran zona reservoir yang berada di bawah lapisan clay cap yang memiliki nilai resistivitas sedang (17,24 – 165,04 Ωm). Keberadaan Sesar Seulimum, sesar lokal, dan manifestasi berupa mata air panas dengan nilai resistivitas sedang (15,55 – 161,26 Ωm) dapat diidentifikasi. Lapisan dengan nilai resistivitas tinggi (185 – 9054 Ωm) diperkirakan sebagai batuan Basaltik dari Formasi Gunung Api Lamteuba yang terdapat pada lapisan paling atas dan menyebar di daerah puncak gunung dan di sekitarnya. Hasil 3D depth slice Seulawah Agam dijumpai persebaran lapisan Basaltik pada daerah tinggi dan diikuti oleh lapisan clay cap yang selaras dengan hasil cross-section 2D. Kesimpulan penelitian menggunakan metode TEM di Seulawah Agam yaitu identifikasi struktur dangkal sistem panas bumi Seulawah Agam yang didominasi 3 lapisan berurut yaitu Formasi Gunung Api Lamteuba, clay cap dan reservoir.

Kata kunci : TEM, TDEM, struktur dangkal, sistem panas bumi, Seulawah Agam

The Transient Electromagnetic (TEM) or Time Domain Electromagnetic (TDEM) method is an active electromagnetic method that transmits electromagnetic waves into the subsurface and then records the electromagnetic response that is formed TEMporarily. TEM has a penetration capability of up to 1 kilometer so it is widely used in geothermal exploration because it is able to identify shallow structures of geothermal systems such as caprock, reservoirs, manifestations, and faults. This study applies the TEM method in the Seulawah Agam area which is estimated to have the prospect of manifesting a geothermal power plant of up to 230 MW. The TEM data was processed by 1D inversion based on the Occam inversion and then displayed with a 2D cross-section and 3D depth slice to identify the shallow anomalous structure of the Seulawah Agam geothermal system. Based on the results of the 2D cross-section found shallow anomalies from the geothermal system, namely the clay cap layer along the track with low resistivity (0,4 – 16,36 Ωm) supported by the presence of a reservoir zone under the clay cap which has moderate resistivity (17,24 – 165,04 Ωm). The existence of the Seulimum Fault, local faults, and manifestations in the form of hot springs with moderate resistivity values (15.55 – 161.26 m) can be identified. A layer with a high resistivity value (185 – 9054 Ωm) is found which is estimated to be Basaltic rock from the Lamteuba Volcano Formation in the uppermost layer which spreads over the mountain peaks and surrounding. The results of the 3D depth slice of Seulawah Agam found the distribution of the Basaltic layer in the high area and followed by the clay cap layer which was in line with the results of the 2D cross-section. The conclusion of the research using the TEM method in Seulawah Agam is the identification of the shallow structure of the Seulawah Agam geothermal system which is dominated by 3 successive layers, namely the Lamteuba Volcano Formation, clay cap and reservoir. Key words : TEM, TDEM, shallow structure, geothermal system, Seulawah Agam

Citation



    SERVICES DESK