Abstrak penelitian terkait dengan energi terbarukan di berbagai negara terus gencar dikembangkan demi mewujudkan nze (nett zero emmission) atau sering disebut dengan emisi nol. usaha-usaha di berbagai negara dalam mewujudkan nze salah satunya dilakukan pada bidang pembangkit tenaga listrik. generator induksi berpenguatan sendiri atau yang sering disebut dengan self excitation induction generator atau seig menjadi salah satu jawaban dari perwujudan energi terbarukan. seig mampu memperoleh daya reaktif dari kapasitor yang terpasang pada terminalnya, selain dari hal tersebut seig juga memiliki keunggulan dalam hal perawatan serta konstruksinya yang sederhana. disamping keunggulan tersebut seig juga mempunyai kelemahan yakni terjadinya fluktuasi tegangan saat terjadinya perubahan beban yang dilayani. pada penelitian ini dilakukan 3 jenis pengujian dengan 2 jenis dilaksanakan dalam ruang lingkup laboratorium teknik elektro serta satu percoban dalam ruang lingkup ujicoba dan melakukan simulasi menggunakan matlab simulink. pengujian pertama bertujuan menguji pengaruh nilai kapasitor minimum agar generator induksi dapat bekerja, dari pengujian tersebut generator dapat bekerja saat diberi kapasitor sebesar 45 uf. pengujian yang ke dua yaitu pengujian pengaruh kecepatan putar generator untuk memperoleh tegangan konstan pada rating 380 volt. untuk mendapatkan tegangan konstan ada dua variabel yang harus diperhatikan yakni besar kapasitor dan kecepatan putar dari generator itu sendiri. untuk memperoleh hasil yang efektif dengan galat yang rendah dirancang suatu sistem simulasi dengan injeksi kapasitor menggunakan sistem kontrol pid dimana perubahan nilai kapasitor diatur oleh sistem kontrol pid. meskipun terjadi perubahan beban tegangan tetap dijaga pada rating nya sebesar 230 v. berdasarkan hasil penelitian dengan menggunakan matlab simulink ini diperoleh persentase galat berada di bawah 1 % sehingga dapat dikatakan sistem kontrol efektif dan berhasil digunakan pada generator induksi jenis seig. kata kunci : energi terbarukan, tegangan konstan, berpenguatan sendiri, generator induksi, kapasitor.
Electronic Theses and Dissertation
Universitas Syiah Kuala
DISSERTATION
INJEKSI NILAI KAPASITOR VARIABEL PADA GENERATOR INDUKSI TIGA PHASA BERPENGUATAN SENDIRI UNTUK MEMPEROLEH TEGANGAN KONSTAN. Banda Aceh Fakultas Pasca Sarjana,2025
Baca Juga : PENGARUH KETIDAKSEIMBANGAN TEGANGAN SUPLAI TERHADAP KINERJA MOTOR INDUKSI TIGA PHASA (sarwin, 2015)
Abstract
ABSTRACT Research related to renewable energy in various countries continues to be intensively developed in order to realize NZE (Net Zero Emission) or often referred to as zero emissions. One of the efforts in various countries to realize NZE is in the field of electricity generation. Self-powered induction generators or what are often called self-excitation induction generators or SEIG are one answer to realizing renewable energy. SEIG is able to obtain reactive power from capacitors installed on its terminals. Apart from this, SEIG also has advantages in terms of maintenance and simple construction. Apart from these advantages, SEIG also has weaknesses, namely the occurrence of voltage fluctuations when the load being served changes. In this research, 3 types of tests were carried out with 2 types carried out within the scope of the Electrical Engineering Laboratory and one experiment within the scope of testing and carrying out simulations using Matlab Simulink. The first test aims to test the effect of the minimum capacitor value so that the induction generator can work. From this test the generator can work when given a capacitor of 45 uF. The second test is testing the effect of generator rotational speed to obtain a constant voltage at a rating of 380 Volts. To get a constant voltage, there are two variables that must be considered, namely the size of the capacitor and the rotational speed of the generator itself. To obtain effective results with low errors, a simulation system with capacitor injection using a PID control system is designed where changes in the capacitor value are regulated by the PID control system. Even though there is a change in load, the voltage is still maintained at its rating of 200 V. Based on the results of research using Matlab Simulink, it was found that the error percentage was below 1%, so it can be said that the control system is effective and successfully used on SEIG type induction generators. Key words: renewable energy, constant voltage, self-excitation, induction generator, capacitor.
Baca Juga : PENGOPERASIAN SINKRONISASI GENERATOR SET (GENSET) 300 KW PADA PT. KARYA TANAH SUBUR MEULABOH (NURHAKIMAH, 2018)