Daerah penelitian ini terletak di kecamatan jeunieb dan sekitarnya dengan luas 25 km2 berada pada koordinat 5°06’48.9”lu - 5°09’31.8”lu dan 96°31’11.6”bt - 96°28’46”bt. daerah penelitian ini jika berdasarkan informasi geologi regional lembar lhokseumawe memiliki 5 formasi yaitu, formasi baong (tmb) dengan anggotanya formasi baong anggota batupasir peuneulien (tmbp), retas dan retas lempeng muda (qpds), formasi keutapang (tuk) dan endapan aluvium (qh). lokasi penelitian memiliki rentang elevasi berkisar antara 12,5 – 137,5 mdpl. pada wilayah penelitian terdapat lereng yang terindikasi dalam kondisi tidak stabil di dekat pemukiman. oleh karena itu perlu dilakukan penelitian untuk mengetahui kondisi kestabilan lereng yang dekat dengan pemukiman sehingga dapat meminimalisir terjadinya longsor. metode yang digunakan dalam penelitian ini adalah pemetaan geologi, rock mass rating (rmr), dan slope mass rating (smr). pemetaan geologi dilakukan untuk memahami kondisi daerah penelitian, meliputi persebaran batuan, struktur geologi, dan geomorfologi. analisis kestabilan lereng yang digunakan yaitu metode rock mass rating (rmr) untuk mengetahui kualitas massa batuan dan mengklasifikasikan massa batuan. selanjutnya metode slope mass rating (smr) bertujuan mengidentifikasi jenis longsoran pada lereng yang diamati, dan memberikan rekomendasi perkuatan lereng yang tidak stabil. berdasarkan hasil penelitian secara langsung, lokasi penelitian ini terdiri dari 7 satuan batuan seperti satuan batupasir, satuan batulanau, batu serpih, serpih karbonatan, satuan mikrodiorit, satuan konglomerat dan satuan endapan alluvium. bentang alam pada daerah penelitian terdiri dari 3 satuan bentuk lahan seperti satuan bentuk lahan struktural s1, satuan bentuk lahan denudasional d5 dan satuan geomorfologi fluvial (f1). dari hasil perhitungan klasifikasi rmr pada lereng 1 diperoleh hasil dengan kelas massa batuan baik yang memiliki bobot 76. pada lereng 2 memiliki hasil kelas massa batuan sedang dengan bobot 55. berdasarkan hasil analisis smr longsoran yang mungkin terjadi pada kedua lereng adalah longsoran baji. lereng 1 memiki nilai 68,5 yang mengindikasikan lereng masuk ke kategori stabil, sehingga tidak ada rekomendasi perkuatan lereng atau bisa diberikan paritan pada kaki lereng. pada lereng 2 memiki nilai 54,1 yang mengindikasikan lereng masuk ke kategori sedang, sehingga rekomendasi perkuatan lereng yang dapat digunakan berupa pemberian paritan pada kaki lereng dan jala kawat dan beton semprot.
Electronic Theses and Dissertation
Universitas Syiah Kuala
SKRIPSI
PEMETAAN GEOLOGI DAN ANALISIS KESTABILAN LERENG DI KECAMATAN JEUNIEB DAN SEKITARNYA, KABUPATEN BIREUEN, PROVINSI ACEH. Banda Aceh Fakultas Teknik,
Baca Juga : PEMETAAN GEOLOGI DAN ANALISIS STABILITAS LERENG MENGGUNAKAN METODE ROCK MASS RATING (RMR) DAN SLOPE MASS RATING (SMR) DI DESA LHOK GEULUMPANG DAN SEKITARNYA, KABUPATEN ACEH JAYA (ALIYUL AJIL, 2025)
Abstract
The research area is located in Jeunieb District and its surroundings with an area of 25 km2 located at coordinates 5°06'48.9 “LU - 5°09'31.8 ‘LU and 96°31'11.6 ’BT - 96°28'46 ”BT. This research area if based on regional geological information of Lhokseumawe sheet has 5 formations namely, Baong Formation (Tmb) with its members Baong Formation Member of Peuneulien Sandstone (Tmbp), Retas and Retas Young Plate (Qpds), Keutapang Formation (Tuk) and Aluvium Deposition (Qh). The study site has an elevation range of 12.5 - 137.5 meters above sea level. In the research area there are slopes that are indicated to be in an unstable condition near the settlement. Therefore, it is necessary to conduct research to determine the stability condition of the slope close to the settlement so as to minimize the occurrence of landslides. The methods used in this research are geological mapping, Rock Mass Rating (RMR), and Slope Mass Rating (SMR). Geological mapping was conducted to understand the condition of the study area, including rock distribution, geological structure, and geomorphology. The slope stability analysis used is the Rock Mass Rating (RMR) method to determine the quality of rock mass and classify rock mass. Furthermore, the Slope Mass Rating (SMR) method aims to identify the type of avalanche on the observed slope, and provide recommendations for strengthening unstable slopes. Based on the results of direct research, this research location consists of 7 rock units such as sandstone unit, siltstone unit, shale rock, carbonate shale, microdiorite unit, conglomerate unit and alluvium sediment unit. The landscape in the study area consists of 3 landform units such as structural landform unit S1, denudational landform unit D5 and fluvial geomorphology unit (F1). From the calculation of RMR classification on slope 1 obtained results with good rock mass class that has a weight of 76. On slope 2 has moderate rock mass class results with a weight of 55. Based on the results of the SMR analysis, avalanches that may occur on both slopes are wedge avalanches. Slope 1 has a value of 68.5 which indicates that the slope falls into the stable category, so there are no recommendations for strengthening the slope or a trench can be given at the foot of the slope. Slope 2 has a value of 54.1 which indicates that the slope is in the moderate category, so the slope reinforcement recommendations that can be used are providing trenches at the foot of the slope and wire mesh and spray concrete.