Universitas Syiah Kuala | ELECTRONIC THESES AND DISSERTATION

Electronic Theses and Dissertation

Universitas Syiah Kuala

    DISSERTATION
Yusran, IDENTIFIKASI KERENTANAN SEISMIK DAN KARAKTERISTIK BATUAN BERDASARKAN KOMBINASI PARAMETER SEISMIK DI WILAYAH ACEH BESAR, INDONESIA. Banda Aceh Program Studi Doktor Matematika Dan Aplikasi Sains Universitas Syiah Kuala,2022

Latar belakang dan tujuan: sifat tanah atau batuan di mana bangunan berada memainkan peran penting dalam getaran tanah yang disebabkan oleh gempa bumi. kawasan aceh besar dan kota banda aceh yang berpenduduk padat dan diapit oleh dua sesar aktif yaitu sesar seulimeum dan segmen aceh. oleh karena itu, sangat penting untuk menyelidiki karakteristik bawah permukaan wilayah tersebut untuk mengurangi risiko gempa karena sejauh ini belum ada studi wilayah yang dilakukan. metode: karakteristik tanah atau batuan bawah permukaan dapat diperoleh dari berbagai parameter seismik. mikrotremor seismik tercatat di 85 lokasi selama dua tahun, yang meliputi dua patahan aktif. amplifikasi seismik, frekuensi dominan dan nilai kerentanan pada setiap titik pengukuran diukur menggunakan metode rasio spektral horizontal-vertikal. metode spac (spatial autocorrelation) digunakan untuk mendapatkan kurva dispersi berdasarkan hubungan antara frekuensi seismik dan kecepatan fasa dari triangular geophones array untuk menentukan kecepatan gelombang geser lapisan bawah permukaan. peta struktur kecepatan dan parameter hvsr dihasilkan dari interpolasi parameter seismik tersebut. temuan: berdasarkan variasi empat parameter geofisika: kecepatan gelombang geser, amplifikasi seismik, frekuensi dominan, dan kerentanan seismik, wilayah studi dapat dikelompokkan menjadi lima kelompok yang berbeda: i) banda aceh, ii) jantho, iii) krueng raya, iv) lhoknga-lhoong, dan v) seulawah, yang mengklasifikasikan berbagai jenis batuan. klasifikasi sifat tanah dari kombinasi data gelombang geser dan rasio spektral horizontal-vertikal berkorelasi dengan geologi daerah penelitian. kesimpulan: kawasan aceh besar dan sekitarnya yang diapit oleh dua sesar aktif dicirikan oleh kecepatan gelombang geser yang rendah dan amplifikasi yang tinggi karena kawasan ini berada di atas cekungan sedimen. oleh karena itu, diperlukan investigasi rinci sebelum membangun infrastruktur. klaster-klaster lainnya terletak pada daerah yang relatif kurang rawan, ditunjukkan dengan kecepatan gelombang geser sedang dan indeks kerawanan gempa sedang hingga rendah. analisis terpadu menunjukkan bahwa kombinasi sifat fisik kecepatan gelombang geser, amplifikasi seismik, dan frekuensi dominan, dapat digunakan untuk menyelidiki litologi dan kerentanan seismik ke dalam cluster tertentu. hasil penelitian sangat penting untuk mitigasi bahaya dan dapat digunakan untuk manajemen risiko bencana oleh pemerintah daerah. untuk mendeskripsikan secara komprehensif jenis-jenis batuan di kawasan aceh besar dan sekitarnya, perlu dilakukan penyelidikan yang lebih mendetail dengan titik-titik pengukuran yang lebih rapat dan juga menggunakan data lain seperti data bor. kata kunci: kerentanan seismik, klasifikasi batuan, klaterisasi batuan, mikrotremor, parameter seismik.



Abstract

BACKGROUND AND PURPOSE: The nature of the soil or rock on which buildings are located plays an important role in ground shaking caused by earthquakes. The Aceh Besar and Banda Aceh areas are densely populated and flanked by two active faults, namely the Seulimeum ​​Fault and the Aceh Segment. Therefore, it is very important to know the subsurface characteristics of the area to reduce the risk of earthquakes because so far no regional studies have been carried out. METHODS: Characteristics of subsurface soil or rock can be obtained from various seismic parameters. Seismic microtremors were recorded at 85 sites over two years, covering two active faults. Seismic amplification, dominant frequency and vulnerability values ​​at each measurement point were measured using the horizontal-vertical spectral ratio method. The SPAC (Spatial Autocorrelation) method is used to obtain a dispersion curve based on the relationship between seismic frequency and phase velocity from triangular geophones array to determine the shear wave velocity of the subsurface layer. Map of velocity structure and HVSR parameters resulting from the interpolation of these seismic parameters. FINDINGS: Based on the variation of four geophysical parameters: shear wave velocity, seismic amplification, dominant frequency, and seismic susceptibility, the study area can be divided into five different groups: I) Banda Aceh, II) Jantho, III) Krueng Raya, IV) Lhoknga-Lhoong , and V) Seulawah, which classifies various types of rocks. Classification of soil properties from the combination of shear wave data and horizontal-vertical spectral ratio correlates with the geology of the study area. CONCLUSION: The Aceh Besar area and its surroundings which are flanked by two active faults are characterized by low wave velocities and high amplification because this area is located above a sedimentary basin. Therefore, an investigation is needed before building infrastructure. The other clusters are located in areas that are relatively less vulnerable, as indicated by moderate shear wave velocity and moderate to low earthquake susceptibility index. Integrated analysis shows that a combination of physical properties of shear wave velocity, seismic amplification, and dominant frequency, can be used to determine the lithology and seismic susceptibility to a particular cluster. The research results are very important for hazard mitigation and can be used for disaster risk management by local governments. In order to comprehensively describe the rock types in Aceh Besar and its surroundings, it is necessary to conduct a more detailed investigation with closer measurement points and also use other data such as drill data. Keywords: Seismic Vulnerability, Rock Classification, Rock Clusterization, Microtremor, Seismic Parameters.



    SERVICES DESK