IDENTIFIKASI PENYEBAB GAGAL STRUKTUR BANGUNAN PELIMPAH (SPILLWAY) MENGGUNAKAN METODE SEISMIK REFRAKSI (STUDI KASUS: BENDUNGAN TUGU, TRENGGALEK, JAWA TIMUR) | ELECTRONIC THESES AND DISSERTATION

Electronic Theses and Dissertation

Universitas Syiah Kuala

    SKRIPSI

IDENTIFIKASI PENYEBAB GAGAL STRUKTUR BANGUNAN PELIMPAH (SPILLWAY) MENGGUNAKAN METODE SEISMIK REFRAKSI (STUDI KASUS: BENDUNGAN TUGU, TRENGGALEK, JAWA TIMUR)


Pengarang

FATHIA MATONDANG - Personal Name;

Dosen Pembimbing

Zul Fadhli - 198604192019031007 - Dosen Pembimbing I
Amsir - 198806162019011101 - Dosen Pembimbing II



Nomor Pokok Mahasiswa

1804107010025

Fakultas & Prodi

Fakultas Teknik / Teknik Geofisika (S1) / PDDIKTI : 33201

Subject
Penerbit

Banda Aceh : Fakultas Teknik., 2022

Bahasa

Indonesia

No Classification

551.22

Literature Searching Service

Hard copy atau foto copy dari buku ini dapat diberikan dengan syarat ketentuan berlaku, jika berminat, silahkan hubungi via telegram (Chat Services LSS)

Dalam mengatasi permasalahan kekeringan dan kebanjiran di Kabupaten Trenggalek, Jawa Timur dilakukan pembangunan Bendungan Tugu. Pembangunan bangunan pelimpah (spillway) Bendungan Tugu tidak luput dari masalah gagal struktur mengingat posisi spillway berada pada kaki Gunung Temon yang materialnya tidak stabil. Oleh karena itu, dilakukan penelitian yang bertujuan untuk mengidentifikasi litologi bawah permukaan dan penyebab gagal struktur spillway Bendungan Tugu menggunakan metode seismik refraksi dan diolah menggunakan metode hagiwara. Penelitian ini menghasilkan penampang yang menunjukkan sebaran nilai kecepatan terhadap kedalaman. Lapisan pertama diinterpretasikan sebagai top soil dengan rentang nilai Vp= 300–500 m/s dengan ketebalan sekitar 5 meter. Lapisan kedua memiliki nilai Vp=500–700 m/s diinterpretasikan sebagai lapisan tanah alluvial berukuran lanau pasiran dengan ketebalan bervariasi 5–10 meter. Lapisan ketiga memiliki nilai Vp=800–1800 m/s diidentifikasikan sebagai lapisan tufa-pasiran dengan ketebalan sekitar 10 meter. Lapisan keempat dengan nilai Vp ≥1800 m/s diidentifikasikan sebagai lapisan breksi vulkanik dengan pelapukan sedang dan memiliki ketebalan 20–25 meter. Penyebab gagal struktur spillway Bendungan Tugu adalah tanah atau batuan yang memiliki rentang nilai Vp=300–1800 m/s, bersifat tidak kompak (mudah terlepas) bergerak dan menunjam spillway Bendungan Tugu sehingga menyebabkan spillway terangkat dan patah.

In overcoming the problem of drought and flooding in Trenggalek Regency, East Java, the Tugu Dam was built. The construction of the Tugu Dam spillway does not escape the problem of structural failure, considering that the spillway is located at the foot of Mount Temon, where the material is unstable. Therefore, a study was conducted that aims to identify the subsurface lithology and the causes of the failure of the Tugu Dam spillway structure using the seismic refraction method and processed using the hagiwara method. This research produces a cross section that shows the distribution of velocity values with depth. The first layer is interpreted as top soil with a value range of Vp= 300–500 m/s with a thickness of about 5 meters. The second layer has a value of Vp=500–700 m/s which is interpreted as an alluvial layer of sandy silt with varying thicknesses of 5–10 meters. The third layer having a value of Vp=800–1800 m/s was identified as a tuff-sand layer with a thickness of about 10 meters. The fourth layer with a Vp value of 1800 m/s was identified as a volcanic breccia layer with moderate weathering and a thickness of 20–25 meters. The cause of the failure of the Tugu Dam spillway structure is soil or rock which has a value range of Vp=300–1800 m/s, is not compact (easily detached) and moves and subducts the Tugu Dam spillway, causing the spillway to lift and break.

Citation



    SERVICES DESK